Module Details |
| The information contained in this module specification was correct at the time of publication but may be subject to change, either during the session because of unforeseen circumstances, or following review of the module at the end of the session. Queries about the module should be directed to the member of staff with responsibility for the module. |
| Title | PARAMETRIC DESIGN AND DIGITAL FABRICATION 1 | ||
| Code | ARCH729 | ||
| Coordinator |
Mr A Agkathidis Architecture Asterios.Agkathidis@liverpool.ac.uk |
||
| Year | CATS Level | Semester | CATS Value |
| Session 2019-20 | Level 7 FHEQ | First Semester | 15 |
Aims |
|
|
To gain knowledge in the use of parametric modelling tools digital/fabrication techniques and apply them in the design and production of a prototype component. |
|
Learning Outcomes |
|
|
(LO1) Students will be able to demonstrate basic knowledge and application of parametric tools. |
|
|
(LO2) Students will be able to demonstrate basic knowledge and application of digital fabrication techniques. |
|
|
(LO3) Students will be able to demonstrate ability to present and communicate design and fabrication process. |
|
|
(LO4) Students will be able to demonstrate ability to apply digital fabrication techniques in relation to meteriality. |
|
|
(S1) Basic knowledge and application of parametric tools. |
|
|
(S2) Basic knowledge and application of digital fabrication techniques. |
|
|
(S3) Ability to present and communicate design and fabrication process. |
|
|
(S4) Ability to apply digital fabrication techniques in relation to meteriality. |
|
Syllabus |
|
|
Weekly tutorials, workshops and presentations. |
|
Teaching and Learning Strategies |
|
|
Teaching Method 1 - Tutorial |
|
Teaching Schedule |
| Lectures | Seminars | Tutorials | Lab Practicals | Fieldwork Placement | Other | TOTAL | |
| Study Hours |
24 |
24 | |||||
| Timetable (if known) | |||||||
| Private Study | 126 | ||||||
| TOTAL HOURS | 150 | ||||||
Assessment |
||||||
| EXAM | Duration | Timing (Semester) |
% of final mark |
Resit/resubmission opportunity |
Penalty for late submission |
Notes |
| CONTINUOUS | Duration | Timing (Semester) |
% of final mark |
Resit/resubmission opportunity |
Penalty for late submission |
Notes |
| Assessment 1 There is a resit opportunity. Standard UoL penalty applies for late submission. This is not an anonymous assessment. Assessment Schedule (When) :January | A digital portfolio/ | 100 | ||||
Recommended Texts |
|
| Reading lists are managed at readinglists.liverpool.ac.uk. Click here to access the reading lists for this module. | |